How to disassemble and assemble the combined switch

How to disassemble and assemble the combined switch

Four-step installation of conjoined switch

Step 1: Install the steel frame floor First lead the wires out of the inner frame of the steel frame, and then fix the steel frame floor on the cassette and the wall with screws

Step 2: Connect the wires Correctly connect the wires to the functional parts

Step 3: Push in the function keys Push the linked function keys into the inner frame of the steel frame in parallel. After pushing in, the function keys at this time will be automatically locked to the buckle device.

Step 4: Install the outer frame and the installation is completed

If the panel cannot be attached to the wall due to the uneven wall during the installation process, please do not use hard objects.

Hit the outer frame, otherwise it will cause damage or deformation of the outer frame

If you have the problem of installing the wrong function keys during the installation process

Please don't worry about it. The disassembly of the conjoined switch is as easy as the installation.

In the disassembly steps, the disassembly of the rocker switch function key is different from the disassembly of the reset switch and the socket function key. Next, we will understand.

Step 1: Remove the outer frame

Use a screwdriver to pry off the steel frame and function keys

Step 2: Pry open the switch button

Pry open the switch key cover with your hand or tools to expose the middle cover of the function key

Step 3: Remove the switch function key

From the front, use a screwdriver to push the four movable buckles of the function keys inward according to the marked positions on the steel frame.

Automatic tripping on the steel frame of the function key

Then pull out the function key to readjust

Removal steps for reset switch

From the front, use a screwdriver to push the four movable buckles of the function keys inward according to the marked positions on the steel frame.

The function key will be automatically tripped from the steel frame and then the function key can be pulled out of the steel frame to adjust

2 gang 1 way Wi-Fi CONTROL WALL SWITCH

Products are tested and approved by authorized labs: VDE, KEMA, NF, ITS.